manbetxapp下载-官方网站[welcome]

    1. <table id="6ypqm"><ruby id="6ypqm"></ruby></table>
    2. <td id="6ypqm"><ruby id="6ypqm"></ruby></td><pre id="6ypqm"></pre>
    3. Ask a consultant a question
      +79000978031 Do you want us to call you back?
      0
      Cart is empty
      Cart (0)
      Your shopping cart is empty!

      The long-awaited update to PCMFlesher 1.2.1

      1. Added a new package 75 "Ford Power Stroke", designed to work with the ECU EDC17, installed with a 6.7l diesel engine in Ford cars. Supported reading, writing, verification and correction of the COP.
      Ford Truck: 6.7L Power Stroke V8 (EDC17CP05) [BC3A] [RD / WR / CK]
      Ford Truck: 6.7L Power Stroke V8 (EDC17CP05) [FC3A] [RD / WR / CK]
      Ford Truck: 6.7L Power Stroke V8 (EDC17CP65) [HC3A] [RD / WR / CK]
      2. A new 76 "Kia / Hyundai Gearbox" package has been added, designed to work with automatic transmission ECUs installed in some Kia / Hyundai vehicles. Supported reading, writing, verification and correction of the COP.
      Kia / Hyundai: MG7.9.8 / MEG17.9.12 Gearbox (ST10F275 / TCU) [RD / WR]
      Kia / Hyundai: TC14 Gearbox (MPC562 / TCU) [RD / WR / CK]
      Kia / Hyundai: TC60 / TC80 / ME (D) G17.9.8 / 13 Gearbox (SH72549 / TCU) [RD / WR / CK]
      Kia / Hyundai: SIM2K-24x / 341 Gearbox (TC1766 / TCU) [RD / WR / CK]
      Kia / Hyundai: SIM2K-24x Gearbox (TC1738 / TCU) [RD / WR / CK]
      Kia / Hyundai: SIM2K-341 Gearbox (TC1738 / TCU) [RD / WR / CK]
      3. In package 12 "Honda / Acura CAN-bus" added support for another type of automatic transmission ECU, as well as updated data on existing ones.
      AT / CVT / DCT (Hitachi SH725x3 / 2048KB) [RD / WR / CK]
      4. In package 21 "Ford USA" added support for Bosch ME9.8 / MEG9.8.1 ECU. Supported reading, writing, verification and correction of the COP.
      Expedition, Navigator 5.4L (Bosch ME9.8 / 2048KB) [RD / WR / CK]
      F-150 5.4L (Bosch MEG9.8.1 / 2536KB) [RD / WR / CK]
      5. Package 22 "Renault" adds support for the EMS3155 ECU, which is installed in a Nissan Juke with a 1.2l turbo engine. Supported reading, writing, verification and correction of the COP.
      Nissan: Juke 1.2T EMS3155 (TC1782 / 2560KB) [RD / WR / CK]
      6. The package 24 "Mitsubishi CAN-bus" added specific support for some ECUs. Supported reading, writing, verification and correction of the COP.
      Colt RallyArt 1.5T (MH8104F / 512KB) [RD / WR / CK]
      Mitsubishi: L200 2.4L MT (2008-) (MH8302F / 512KB) [RD / WR / CK]
      7. In the package 29 "Ford PWM" added support for checking and correcting the COP for the EEC-V ECU.
      EEC-V 216K (EEC-V) [RD / WR / CK]
      8. The package 38 "Renault K-Line" adds support for the Sirius 35 ECU. It supports reading, writing, checking and correcting the COP.
      Renault: Sirius 35 (C167 / 512KB) [RD / WR / CK]
      9. The 41 "Scania EMS S6 / EDC S6" package adds support for the EDC S6 ECU. Supported reading, writing, verification and correction of the COP.
      Scania EMS / EDC S6 250Kbps (MPC555) [RD / WR / CK]
      10. Package 44 "Scania EMS S7 / S8 / EMD1" adds support for the EMD1 ECU. Supported recording, verification and correction of the COP.
      Scania EMS S8 / EMD1 500Kbps (MPC5566) [WR / CK]
      11. In package 46 "Toyota / Lexus / Scion / Hino generation 2" and 74 "... generation 3", the definition of the type of P5-CAN / UDS control unit is added
      12. In package 47 "Mitsubishi Gearbox CAN-bus" added support for checking and correcting the KS for Mitsubishi control units, as well as support for CVT control units with MH8115, and AWD, ACD control units.
      CVT ASX / Outlander 3 / Eclipse Cross 1.5T / 2.0L / 2.4L (MH8115F / 1.25MB) [WR / CK]
      AWD Outlander 3 / Eclipse Cross (MH8104F / 512KB) [RD / WR / CK]
      ACD Lancer RallyArt X (2009-2011) (MH8104F / 512KB) [RD / WR / CK]
      13. In package 48 "VAG ME (D) 17 UDS" support is added for the MED17.1.1 ECU in the Master / Slave version, as well as 17.1.10. It supports virtual reading, writing, checking and correction of the COP.
      2.0L, 2.5L, 4.0L TSI, 4.2L FSI (MED17.1 / 17.1.1 / 17.1.10 / 17.1.62) [VR / WR / CK]
      5.2L FSI Master / Salve (MED17.1.1) [VR / WR / CK]
      14. In package 51 "China" added support for new variants of the ECU ME17 / MED17. Supported reading, writing, verification and correction of the COP.
      Chery 2019+ ME17 (ME17.8.8) [RD / WR / CK]
      Great Wall / Haval MED17 (MED17.8.10) [RD / WR / CK]
      Geely MED17 (MED17.8.10) [RD / WR / CK]
      MG MED17 (MED17.8.10) [RD / WR / CK]
      Chevrolet 1.5L Aveo / Sail 3 (ME17.8.8) [RD / WR / CK]
      15. The package 53 "Infineon Tricore BSL" added support for the ECU JLR SID208, PSA EDC17C60, PSA MED17.4.4, Delphi CRD3 / CRD3P.
      16. In the package 59 "Renault / Nissan UDS" added support ECU hitachi with microcontroller R7F701205. Supported reading, writing, verification and correction of the COP.
      Nissan: 0.66L, 1.6L Hitachi UDS (R7F701205 / 2MB) [RD / WR / CK]
      17. In the package 61 "Kia / Hyundai CPGDSH / CPEGD" added support for CPEGD2.20.3 / CPEGD2.20.4 ECU. It supports unlocking, reading, writing, checking and correcting the COP when directly connected to the computer.
      Kia / Hyundai: 1.4T, 1.6L (CPEGD2.20.3 / CPEGD2.20.4 / UDS) [RD / WR / CK / UNLOCK]
      18. The package 69 "Mercedes-Benz MED17 / EDC17" adds support for the ECU MED17.7.2, installed in Infiniti cars, as well as EDC17C43.
      EDC17C43 / CP46 / CP57 / CP60 / C66 [RD / WR / CK]
      19. In the package 70 "Jeep EDC17" added support for the EDC17CP27 ECU: reading, writing, checking and correcting the COP.
      2.8L CRDI (EDC17CP27) [RD / WR / CK]
      20. In the package 71 "Bosch MEDC17 Bootloader" added support for the computer PSA EDC17C60, PSA MED17.4.4.
      21. In packages 48, 50, 57, 58, 65 virtual reading of files from the server is added.
      22. Changes in the interface of the main window of the program, the button "Virt. Read" is added.
      23. Other useful changes.

      manbetxapp下载